机 器 性 能 Introduction

LED灯在线老化机主要用于对组装完成的LED整灯进行老化。
The LED Bulb Online Ageing Machine is used for ageing LED Bulbs.

1、机器共配备5台15KVA自动稳压调压器，具有五段电压：低压老化、常压老化、常压冲击、高压老化、高压冲击功能。
The machine is divided into five parts, each part is equipped with a 15KVA automatic voltage regulator. Bulbs will be aged in the following processes: ageing by low voltage, ageing by common voltage, spark by common voltage, ageing by high voltage, spark by high voltage.

2、采用电机变频控制和光电开关定位，对输送带进行间歇式运动控制，方便连线时和机械手连接，实现自动上下管。
Controlled by stepping motor and located by optoelectronic switch, the conveyor moves intermittently, it is convenient to loading and unloading bulbs by mechanical hands.

3、采用光电传感器对低电压时异常产品进行灭灯检测和剔除。
The bulbs which cannot work by low voltage will be detected and sorted out via. the photoelectric sensor.

4、带有温度传感器和自动排风控制，保持箱内温度恒定。
Inside the machine, the temperature sensors and air exhaust fans keep temperature constant.

5、触摸屏人机操作界面，在触摸屏上可设置和保存100种规格参数，包括老化电压、老化时间、冲击时间、冲击次数等。
100 types of different parameters can be set and saved on the touch panel, including ageing voltage, ageing time, spark time, spark times etc.

6、操作面板上设置启动、停止、急停开关，运行、冲击、故障报警指示灯，老化电压、总电流、柜内温度指示；能一键启动，启动后人机界面上显示工作状态。
On the operation panel, there are switchs of start, emergency stop and pause, lights of running, sparking and error alarm, and the data of ageing voltage, current, and internal temperature. The machine can be started by one key, and the working status will be shown.

7、设备组成 Configurations:

1).机架、传动机构、安装板和灯座；Body frame, Transmission Gear, Mounting Panel and Lamp Holders;

2).PLC、变频器、调压器等电气控制系统；Electrical control units: PLC, Frequency Converters, Voltage Regulator, etc;

3).光电开关、温度传感器等检测系统。Detecting units: Optoelectronic Switch, Temperature Sensor, etc.